Rope for crane purpose

This steel wire rope is diveded into black(ungalvanized) and galvanized by surface state. For galvanization, there is grade A and B the two zinc coating grades for choice. For galvanized rope, all the wires in the rope should be galvanized indeed. Fiber core(natural fiber core, synthetic fiber core and composite fiber core) and wire core(IWRC, IWSC and EPI-WRC) are the primary kinds for the steel wire rope. Fiber core should be sufficiently dipped into lubricating grease aimed to corrosion and rust resistance. Steel wire rope surface should be evenly and completely applied for greased oil whatever ungalvanized or galvanized provided special appointment available. Tensile strength for this steel wire rope has the three grades of 1770mpa, 1960mpa and 2160mpa, provided special appointment available.

Steel wire rope should be twisted tightly, balanced and unloose in manufacturing. Steel wire rope also should be no wave-shape as unrolled naturally without loading. Wires in the rope is not allowed to be crossed, bent and broken. Further, each of lay length in the same steel wire rope should be almost alike without obvious discrepancy.

This steel wire rope should accept split test, which means that the rope needs seperated into stands and wires and then detected on each wire by various items, such as wire size, numbers, tensile strength, knot strength, bending, torsion, zinc coating test and grease oil content of test in fiber core. For knot strength test, wire should achieve the knot tensile strength as 50% minimum as that of original without knot. Further, steel wire rope is required to involve the test of length, weight, surface, breaking load and unloose inspection.